Winterizing a Los Angeles Water Heater

Posted by on Nov 24, 2014 in Water Heater Repair Los Angeles

We love to share tips on how to save on energy expenses at home here at Water Heater Repair Los Angeles. Here are some of the best ways to get ones water heater ready for the winter months.

A simple way to check ones water heater’s need for insulation is to put ones hand close to or on the outside of the storage tank. It is feels warm, insulating the tank is recommended. During the winter this heat loss you just felt can add up. Conversely in the summer season, if the water heater is located inside the house, and not in a garage, it can add heat to the space that you are attempting to cool. The heat you feel is certainly heat being lost. If it is not warm at all that is an excellent indicator that the tank’s internal insulation is in respectable shape. Brand-new water heating systems are being produced with a great amount of internal insulation today. You can check the manufacture’s label to see what the R-value is. If it R-24 or higher, one ought to be in fantastic shape without having to include an insulation blanket to the water heater.

Los Angeles Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. Initially consult your energy company, for some have insulation kits at lowered costs for homeowners. A hot water heater blanket will come in various sizes depending on the gallon size of the storage tank. The higher the R-value, the more insulation power it has. We would recommend getting at least an R-11.

The blankets are easy to install. They will come with insulation tape to complete the seams of the blanket. The shinny or vinyl side goes on the outside.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and do not wrap around the controller on the bottom. Likewise, do not wrap the T&P valve lever, or the bottom of tank for that is where air enters. For electric water heaters, the top can be wrapped for there is not an exhaust flue, but do not wrap the heating-element access panels.

Water heater blankets will certainly last quite a long period of time. You might even have the ability to utilize the very same one once again whenever the water heater is replaced, providing it’s the exact same size storage tank.

Water Heater Pipe Insulation

There are two types of pipe insulation that need to be utilized for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap ought to be utilized and must be connected with either high temperature aluminum tape or wire. Foam insulation sleeves can be made use of for all the pipes that are additionally away then 6 inches of the flue then.

The U.S. Department of Energy recommends that house owners insulate a minimum of 6 feet of the pipe coming into and out of the hot water heater. This can increase the temperature level at the faucets 2 to 4 degrees and save money on heating. We also recommend wrapping both the hot and cold pipes too just due to the fact that every bit helps.

Energy Savings from Los Angeles Water Heater Insulation

Insulating an ineffective water heater can cut the cost of running that heater by 5 % to 10 %. Depending on the model, that can save anywhere from $5 to $20 annually, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation might decrease standby heat losses by 25 % – 45 % and save about 4 % – 9 % in water heating expenses.

What others round the web are saying: